Vicon RV 4116, Operation And Maintenance Manual

Page: 112 / 192

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ Product feeding unit (with simple feeder)
2
1
7
-2
3
2
-0
.f
m
ID
M
English
- 106 -
Part 5
PRODUCT CLOGGING REMOVAL IN THE FEEDING UNIT
91
Follow the instructions.
B
A
ID
M
-2
1
7
2
0
7
0
0
3
0
1
.p
d
f
1-
Make sure tractor PTO is dis-
engaged.
2-
Stop the engine, apply the
parking brake and disengage
the ignition key.
3-
Remove the product that clogs
the feeding unit
(A) by using
the specific tool (B) .
4-
Restart the motor of the tractor.
5-
Activate the PTO to check if the
feeding unit has unclogged.
If the feeding unit has not unc-
logged, immediately deactivate
the PTO.
6-
Place the lever (C) in position 1
and do not release it until the
completion of the bale unload-
ing operation.
1
2
ID
M
-2
1
7
2
0
7
0
0
4
0
1
.p
d
f
B
E
D
C
7-
Switch off the engine of the
tractor, and then disengage the
ignition key.
8-
Open the cover (D) .
9-
Close the cock (E) to assure
safety conditions.
10-
Remove the product that clogs
the feeding unit by using the
specific tool
(B) .
11-
Check the condition of the
safety bolt and, if necessary,
replace it (See "How to replace
the safety bolt").
12-
Open the cock (E) .
13-
Close the cover (D) .
14-
Restart the motor of the tractor.
15-
Place the lever (C) of the hy-
draulic control valve in the tractor in position 2 to close the tail gate.
16-
Activate the PTO to check if the feeding unit has unclogged.