Vicon RV 4116, Operation And Maintenance Manual

Page: 189 / 192

4
83-011-0.
fm
ID
M
English
- 23 -
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ Electronic control system
EQUIPMENT OPERATION TROUBLESHOOTING
24
In case of a general trouble of the equipment, it
is possible to check whether it is caused by the
button operation.
Follow the instructions.
1. Display "Set-up" screen page.
2. Press the push-button
(A) .
3. Press button (B) twice.
The screen page displays the equipment
layout
4. Press the push-button (C) .
5. Press the buttons of equipment (one at a
time) and check whether the correspond-
ing icon is activated on the screen page.
In case of a trouble, refer to the assistance
centre authorised by the manufacturer.
6. Press the push-button (C) .
The equipment is now ready to run.
TROUBLES, CAUSES, REMEDIES
25
Any time that an irregularity about machine operation occurs, an acoustic
signal turns on and the display shows an alarm message.
Some failures may be resolved by the user; others require precise tech-
nical skills or special abilities and must be exclusively resolved by quali-
fied personnel with certified experience, achieved in the specific
intervention field.
If malfunctions not included in the chart occur, the user may inform the
manufacturer about them so to actively help in developing new solutions
and technical and implementation improvements.
In case of need, please apply to the manufacturer’s Technical Assistance
Service or to an authorised workshop.
The chart lists the messages about possible irregularities, which can oc-
cur during the operation, as well as the solutions to remedy them.
A
B
C
Table 1: Operation failures
n° Alarm description Cause Cure
E1 Net operation operating
The net has not been cut
properly or it is dragged by the
bale.
Restore the proper operation of
the net binder unit.
The net forward potentiometer is
not properly regulated.
Contact the Technical
Assistance Centre that is
authorised by the manufacturer
E2 Net feeding NOT operating
The net is broken or jammed.
Restore the proper operation of
the net binder unit.
The net forward potentiometer is
not properly regulated.
Contact the Technical
Assistance Centre that is
authorised by the manufacturer