Vicon RV 4116, Operation And Maintenance Manual

Page: 75 / 192

4
83-004-0.
fm
ID
M
English
- 69 -
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ General information about the machine
Part 2
Caution
Precaution
Make sure that the hitch pin (C)
is fully introduced to assure that
the tightener unit rests on the
hitch pin.
If it is not possible to completely
introduce the pin (C), contact the
Manufacturer's or the local deal-
er's After-Sales Service.
6. Adjust the lever of the tractor
hydraulic control valve in posi-
tion
2 , and then release it when
the tightener unit (D) leans on
the component (C) . This way,
the belts will loosen.
7. Close the cock (E) to assure
safety conditions.
8. Switch off the engine of the
tractor, and then disengage the
ignition key.
9. Clean and remove product res-
idues between the rollers and
the belts.
10. Check the general conditions
of the devices in the baling
chamber.
11. Open the cock (E) .
Caution
Precaution
Before opening the cock , make
sure that the cleaning opera-
tions have been completed.
12. Start the engine of the tractor
from the driver’s seat.
13. Place lever of the hydraulic control valve in the tractor in position 1 to
open the tail gate.
14. Remove the locking pin (B) and the hitch pin (C) ; after that, re-intro-
duce the plug into the hole (C1) .
15. Place the lever of the hydraulic control valve in the tractor in position
2 to close the tail gate.
16. Close the cover (A) .
1
2
3
ID
M
-21722901400.
pdf
B
C
D
D
A
C1 C1
C2
IDM-21722104400.pdf
E