Vicon RV 4116, Operation And Maintenance Manual

Page: 25 / 192

4
83-004-0.
fm
ID
M
English
- 19 -
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ General information about the machine
Part 2
–
When the bale achieves the set
diameter, the electronic control
system emits a sound signal to
warn the operator that it is nec-
essary to interrupt the forward
movement of the tractor.
According to the selected type
of binding (twine, net or mixed)
and the operating mode set in
the electronic control system
(manual or automatic), the
binder unit starts the bale bind-
ing operation.
–
At the end of the binding proc-
ess, the electronic control sys-
tem emits another sound signal
to warn the operator that it is
possible to open the tail gate
for bale unloading.
If the machine is equipped with
the bale kicker , you can restart
working without the need to
perform any additional ma-
noeuvre.
If the machine is not equipped
with the bale kicker , the opera-
tor will have to move the ma-
chine backwards of about 4÷5 m,
and then unload the bale. At the
end of the unloading operation,
in order to prevent the tail gate
from bumping against the bale
during the closing operation, the operator must take the machine
back to the beginning of the windrow; the work can be continued by
applying the specific procedures.
Caution
Precaution
In case of soils whose slope can cause risks of sudden and uncon-
trolled movements of the bale, unload the bale crosswise to the
slope. Use this precaution especially when the machine is equipped
with the bale kicker.
If it is not possible to unload the bale in a safe way, transfer the ma-
chine into a suitable area, and then unload the bale.
Tightener unit
ID
M-2172
2900401.
pdf
Belts
Baling chamber
Product bale
Electronic control system
ID
M
-21720300501.
pdf
Product bale Electronic control system