Operation,
Remote Operation
139187 / Rev. 500
RGS-2000NG TCAS Test Set Operation Manual
1-2-5
September 2021
Subject to Export Control. See Cover Page for details.
Page 143
5.9.8.1.7
UTC Coupled Condition
5.9.8.2
Ground Uplink Application Data
5.9.8.2.1
Information Frames Quantity
5.9.8.2.2
Information Frame Data
Command Syntax:
{:RTG | :RTG2000NG}{:SCE | :SCENARIO}{:STAT: | :STATIC: | :DYN: |
:DYNAMIC:}<intruder number>{:UTC}SP{ON | OFF}CR
Description:
This command enables or disables the UTC coupled condition of the
specified intruder. The <intruder number> specifies the number of the
intruder in the channel grouping specified.
Example:
:RGS:SCE:STAT:1:UTC ON\r
Command Syntax:
{:RTG | :RTG2000NG}{:SCE | :SCENARIO}{:STAT: | :STATIC:}<intruder
number>{:UAT}{:GUS}{:IFRAME}{:NIFRAMES}SP<numeric>CR
Description:
This command sets the quantity of information frames for the selected
intruder. The <intruder number> specifies the number of the intruder in the
channel grouping specified.
Numeric:
0 to 255 (decimal ASCII)
Example:
:RGS:SCE:STAT:1:UAT:GUS:IFRAME:NIFRAMES 6\r
Command Syntax:
{:RTG | :RTG2000NG}{:SCE | :SCENARIO}{:STAT: | :STATIC:}<intruder
number>{:UAT}{:GUS}{:IFRAME}<frame
no>{:IFDATA}SP{{TEXT,<text>}|{HEX,<numeric>}|{FILE,<pathname>}}CR
Description:
This command sets the frame data content for the selected intruder. The
<intruder number> specifies the number of the intruder in the channel
grouping specified. The <frame no> specifies the number of the information
frame. The source of the frame data content is from an alphanumeric string
(TEXT), a hexadecimal string (HEX) or a file (FILE).
{TEXT,<text>}
<text> text ASCII
{HEX,<numeric>}
<numeric> hexadecimal ASCII
{FILE,<pathname>}
<pathname> text ASCII. For a correct pathname replace the “:” character
next to the driver letter with the “..” character.
Example:
:RGS:SCE:STAT:2:UAT:GUS:IFRAME:1:IFDATA TEXT,Tail #1\r
:RGS:SCE:STAT:2:UAT:GUS:IFRAME:1:IFDATA HEX,FA123753\r
:RGS:SCE:STAT:2:UAT:GUS:IFRAME:1:IFDATA FILE,D..UATData.txt\r
