Operation,
Screen Layout and Navigation
1-2-3
RGS-2000NG TCAS Test Set Operation Manual
139187 / Rev. 500
Page 204
Subject to Export Control. See Cover Page for details.
September 2021
3.7.2
NETWORK CONNECTIONS CHANGE SETTINGS SCREEN
The Change Settings Screen is used to manage the Test Set’s Local Area Network (LAN) connections.
This screen is displayed by selecting a network connection from the Network Connections Table on the
Network Connections Screen and pressing the Change Settings Softkey.
Refer to Section
3.7.3, How to Configure Network Connections
for instructions for changing the Test
Set’s network connections.
F i g ure 1 . 2 . 3 - 1 77 D H C P N e t w o rk S e t t i n g s E x a m p l e
Screen Components
Descriptio n
Local Area Connection
Obtain an IP Address Automatically
Selects DHCP Mode for establishing a LAN connection.
Use the following IP Address:
Selects Static IP Mode for establishing a LAN
connection.
IP Address Field
When DHCP Mode is selected this field displays the IP
Address assigned to the Test Set by the network.
When Static Mode is selected this field is used to define
the Test Set’s LAN IP Address.
Subnet Mask Field
When DHCP Mode is selected this field displays the
Subnet Mask assigned to the Test Set by the network.
When Static Mode is selected this field is used to define
the Test Set’s Subnet Mask.
Gateway Field
When DHCP Mode is selected this field displays the
Gateway assigned to the Test Set by the network.
When Static Mode is selected this field is used to define
the Test Set’s server Gateway
Set Softkey
Initializes the network mode and/or settings.
