Operation,
Remote Operation
139187 / Rev. 500
RGS-2000NG TCAS Test Set Operation Manual
1-2-5
September 2021
Subject to Export Control. See Cover Page for details.
Page 87
5.9.4.19.6
Track
5.9.4.19.7
Velocity
5.9.4.20
Position Waypoint Parameters
5.9.4.20.1
Altitude
Command Syntax:
{:RGS | :RGS2000NG}{:SCE | :SCENARIO}{:STAT: | :STATIC: | :DYN: |
:DYNAMIC:}<intruder number>{:TRA | :TRACK}SP<numeric>CR
Description:
This command sets the selected intruder track angle.
Numeric:
-180 to 180 degrees (decimal ASCII)
0 to 360 degrees (decimal ASCII)
Default:
0
Example:
:RGS:SCE:STAT:1:TRA 230\r
NOTE:
The track information is only used for the velocity squitter of an extended
Mode S when the intruder is a static intruder.
Command Syntax:
{:RGS | :RGS2000NG}{:SCE | :SCENARIO}{:STAT: | :STATIC: | :DYN: |
:DYNAMIC:}<intruder number>{:VEL | :VELOCITY}SP{NODATA |
<numeric>}CR
Description:
This command sets the selected intruder to the specified velocity. If velocity
data is not available, then use the keyword “NODATA.” If velocity data is
not available then the E/W velocity, N/S velocity and Ground Speed
information is not available.
Numeric:
0 to 5782 knots (decimal ASCII)
Default:
0
Example:
:RGS:SCE:DYN:1:VEL 321\r
NOTE:
The track information is only used for the velocity squitter of an extended
Mode S when the intruder is a static intruder.
Command Syntax:
{:RGS | :RGS2000NG}{:SCE | :SCENARIO}{:DYN: | :DYNAMIC:}<intruder
number>{:WAY | :WAYPOINTS}{:POS: | :POSITION:}<position
number>{:ALT | :ALTITUDE}SP<numeric>CR
Description:
This command sets the altitude at the selected waypoint for the selected
intruder.
Numeric:
Altitude Binary Mode: -1000 to 50175 feet in 25 feet resolution (decimal
ASCII)
Altitude Gilham Mode: -1000 to 126700 feet in 100 feet resolution (decimal
ASCII)
Default:
Intruder Altitude
Example:
:RGS:SCE:DYN:1:WAY:POS:1:ALT 2000\r
