Operation,
Remote Operation
1-2-5
RGS-2000NG TCAS Test Set Operation Manual
139187 / Rev. 500
Page 62
Subject to Export Control. See Cover Page for details.
September 2021
5.9.4.2.2.1.3 Interval Start Time
5.9.4.2.2.1.4 Interval Stop Time
5.9.4.2.2.2
Static AOS Schedule
5.9.4.2.2.2.1 Interval Enable
Command Syntax:
{:RGS | :RGS2000NG}{:SCE | :SCENARIO}{:DYN: | :DYNAMIC:}<intruder
number>{:SAOS}{:INT: | :INTERVAL:}<interval
number>{:BEGIN}SP<numeric>CR
Description:
This command sets the start time for the selected aircraft oper ational status
squitter message interval for the selected intruder.
Numeric:
0 to 6550 seconds (decimal ASCII) (Resolution 0.1)
Default:
By default, the spaces not defined between intervals are consid ered off.
Example:
:RGS:SCE:DYN:1:SAOS:INT:2:BEGIN 3.8\r
NOTE:
Only the user can define the intervals where the message is transmitted.
Command Syntax:
{:RGS | :RGS2000NG}{:SCE | :SCENARIO}{:DYN: | :DYNAMIC:}<intruder
number>{:SAOS}{:INT: | :INTERVAL:}<interval
number>{:END}SP<numeric>CR
Description:
This command sets the stop time for the selected aircraft operational status
squitter message interval fo r the selected intruder.
Numeric:
0 to 6550 seconds (decimal ASCII) (Resolution 0.1)
Default:
By default, the spaces not defined between intervals are consid ered off.
Example:
:RGS:SCE:DYN:1:SAOS:INT:2:END 5.8\r
NOTE:
Only the user can define the intervals where the message is transmitted.
Command Syntax:
{:RGS | :RGS2000NG}{:SCE | :SCENARIO}{:STAT: | :STATIC:}<intruder
number>{:SAOS}{:ENA | :ENABLE}SP{ON | OFF}CR
Description:
This command enables or disables the aircraft operational status squitter
message of the specified intruder.
Default:
On
Example:
:RGS:SCE:STAT:1:SAOS:ENA ON\r
