Operation,
Remote Operation
1-2-5
RGS-2000NG TCAS Test Set Operation Manual
139187 / Rev. 500
Page 140
Subject to Export Control. See Cover Page for details.
September 2021
5.9.7.16.5
Mode Status Payload Message Element
5.9.7.16.6
Auxiliary State Vector Payload Message Element
5.9.7.16.7
Target State Payload Message Element
5.9.7.16.8
Retrigger Long ADS-B Message Dataset Size
Command Syntax:
{:RTG | :RTG2000NG}{:SCE | :SCENARIO}{:STAT: | :STATIC:}<intruder
number>{: PLMS}SP<numeric>CR
Description:
This command sets the Mode Status payload message element of the
specified intruder. This command applies to ADS-B Messages with payload
type code of ‘1’ and ‘3.’ The data message is padded on the right with zeros
for a length 24 hexadecimal ASCII. The <intruder number> specifies the
number of the intruder in the channel grouping specified.
Numeric:
0 to FFFFFFFFFFFFFFFFFFFFFFFF (24 hexadecimal ASCII)
Example:
:RGS:SCE:STAT:1:PLMS 0FFCA1230000000001\r
Command Syntax:
{:RTG | :RTG2000NG}{:SCE | :SCENARIO}{:STAT: | :STATIC:}<intruder
number>{: PLASV}SP<numeric>CR
Description:
This command sets the auxiliary state vector payload message element of
the specified intruder. This command applies to ADS-B Messages with
payload type code of ‘1’, ‘2’, ‘5’ and ‘5.6.’ The data message is padded on
the right with zeros for a length 10 hexadecimal ASCII. The <intruder
number> specifies the number of the intruder in the channel grouping
specified.
Numeric:
0 to FFFFFFFFFF (10 hexadecimal ASCII)
Example:
:RGS:SCE:STAT:1:PLASV F00000000F\r
Command Syntax:
{:RTG | :RTG2000NG}{:SCE | :SCENARIO}{:STAT: | :STATIC:}<intruder
number>{: PLTS}SP<numeric>CR
Description:
This command sets the intruder state payload message element of the
specified intruder. This command applies to ADS-B Messages with payload
type code of ‘3’, ‘4’ and ‘6.’ The data message is padded on the right with
zeros for a length 10 hexadecimal ASCII. The <intruder number> specifies
the number of the intruder in the channel grouping specified.
Numeric:
0 to FFFFFFFFFF (10 hexadecimal ASCII)
Example:
:RGS:SCE:STAT:1:PLTS 300000000B\r
Command Syntax:
{:RTG | :RTG2000NG}{:SCE | :SCENARIO}{:STAT: | :STATIC:}<intruder
number>{: DSSIZE}SP{48 | 64 | 80 | 83 | 107}CR
Description:
This command sets the dataset size for the ADS-N long message data used
for UAT Special Test Mode (Retrigger Long ADS-B Message) of the
specified intruder. The <intruder number> specifies the number of the
intruder in the channel grouping specified.
Default:
48
Example:
:RGS:SCE:STAT:1:DSSIZE 64\r
