VESPA GTV 125, Service Station Manual

Page: 44 / 278

Check
-Stand the vehicle on its centre stand on flat
ground;
-Remove the oil dipstick " A ", dry it with a clean
cloth and put it back into its hole tightening it
completely ;
-Take out the dipstick checking that the oil level
reaches the dipstick lower notch; if the level is un-
der the MAX. mark, it needs to be filled with the
right amount of hub oil.
-Screw up the oil dipstick again and make sure it
is locked properly into place.
Replacement
-Remove the oil cap « A ».
- Unscrew the oil drainage cap " B " and drain out
all the oil.
- Screw in the drainage cap again and fill the hub
with the prescribed oil.
Recommended products
AGIP ROTRA 80W-90 Rear hub oil
SAE 80W/90 Oil that exceeds the requirements of
API GL3 specifications
Characteristic
Rear hub oil
Capacity ~ 150 cm³
Locking torques (N*m)
Hub oil drainage screw 15 ÷ 17 Nm
Air filter
Cleaning (Every 12,000 km):
- Wash with water and car shampoo.
Maintenance
Vespa GTV 125
MAIN - 10