manualshive.com logo in svg

VESPA GTV 125, Service Station Manual

The VESPA GTV 125 is a stylish and reliable scooter that combines classic design with modern technology. To ensure its optimal performance, it is essential to have the Service Station Manual at your disposal. You can easily download this comprehensive manual for free, from our website, manualshive.com, and maintain your Vespa with confidence.

Share
Download
background image

Inspecting the cam shaft

- Inspect the cam shaft for signs of abnormal wear

on the cams.

- Check the cam height.

- Check there is no wear on the cam shaft retaining

plate and its associated groove on the cam shaft.

- If any of the above dimensions are outside the

specified limits, or there are signs of excessive

wear, replace the defective components with new

ones.

- Check there are no signs of wear on the auto-

matic valve-lifter cam, or the end-of stroke roller,

or the rubber buffer on the automatic valve-lifter

retaining cover.

- Check that the valve lifting spring has not yielded.

- Replace any defective or worn components.

- Check the rocker pins do not show signs of wear

or scoring.

- Measure the internal diameter of each rocker

arm.

Check there are no signs of wear on the pad from

contact with the cam and on the jointed adjustment

plate.

Characteristic

Internal rocker arm diameter: Standard diame-
ter

Diameter 12.000 - 12.011 mm

Rocker arm pin diameter: Standard diameter

Diameter 11.977 - 11.985 mm

Engine

Vespa GTV 125

ENG - 44

Summary of Contents for GTV 125























































































































































































































































































Reviews:

No comments

Related manuals for GTV 125

Razor E Prime Manual preview
E Prime
Brand: Razor Pages: 28
Roma Medical Vegas 2 R100 User Manual preview
Vegas 2 R100
Brand: Roma Medical Pages: 20
Rollplay 24V Wave Catcher W301 Owner'S Manual And Assembly Instructions preview
24V Wave Catcher W301
Brand: Rollplay Pages: 24
Rollplay PJ MASKS SCOOTER Series Owner'S Manual And Assembly Instructions preview
PJ MASKS SCOOTER Series
Brand: Rollplay Pages: 24
PEUGEOT Metropolis Owner'S Manual preview
Metropolis
Brand: PEUGEOT Pages: 28
ESAL ES 40 User Manual preview
ES 40
Brand: ESAL Pages: 9
EleCycles FDB01 Manual preview
FDB01
Brand: EleCycles Pages: 20
ForU 3S Operating Manual preview
3S
Brand: ForU Pages: 80
Shoprider Deluxe S-889NR User Manual preview
Deluxe S-889NR
Brand: Shoprider Pages: 20
SSR Motorsports Sprinter 16 Owner'S Manual preview
Sprinter 16
Brand: SSR Motorsports Pages: 28
SSR Motorsports SEEV-800 Product Specifications preview
SEEV-800
Brand: SSR Motorsports Pages: 28
kikkaride REBEL Instructions For Use Manual preview
REBEL
Brand: kikkaride Pages: 29
WangYe WY250T-19 Manual preview
WY250T-19
Brand: WangYe Pages: 20
Youin BK1001 User Manual preview
BK1001
Brand: Youin Pages: 140
Olsson and Brothers E-SCOOTER User'S Manual And Garantee preview
E-SCOOTER
Brand: Olsson and Brothers Pages: 68
Qwic PREMIUM MN8 Manual preview
PREMIUM MN8
Brand: Qwic Pages: 108
Jetson Hex Kick Scooter Manual preview
Hex Kick Scooter
Brand: Jetson Pages: 23
Daymak Photon Standard User Manual preview
Photon Standard
Brand: Daymak Pages: 13

Brands by name

Popular brands

Load more brands