Vertiv
|
XTE 802 Series Walk-In-Cabinet (WIC) Description & Installation Manual (631-205-434)
|
Rev. D
15
PURPOSE OF THIS DOCUMENT
This document provides description and installation instructions for the XTE 802 Series Walk-In-Cabinet (WIC);
Spec. No. F2018009, including associated foundation kits and platforms.
When using this document, consider the footprint for the XTE 802 Series Walk-In-Cabinet (WIC) you are
installing as well as any installed options when determining which procedures contained within this document
will be applicable for your installation.
Procedures related to the provisioning, start-up, and acceptance of associated telecom equipment are not
covered in this document.
Documents that supplement the information in this document are referenced in “Sequence of Procedures” on
page 46.
PRODUCT DESCRIPTION
General
The XTE 802 Series Walk-In-Cabinet (WIC) ensures vital electronic equipment is protected from vandalism and
environmental damage. The XTE 802 Series Walk-In-Cabinet (WIC) may be equipped with a NetSure™ 7100
Power System (-48 VDC at 1000 amps, +24 VDC at 500 amps, 3 row distribution). The XTE 802 Series Walk-
In-Cabinet (WIC) offers an array of climate control, remote monitoring and control, power, mounting and
configuration options. See
for overall views of the XTE 802 Series Walk-In-Cabinet (WIC).
Figure 1:
Overall Views of XTE 802 Series Walk-In-Cabinet (WIC)
Front
Rear
