Vertiv
|
XTE 802 Series Walk-In-Cabinet (WIC) Description & Installation Manual (631-205-434)
|
Rev. D
72
10.
Repeat steps 3 through 9 for all five helicals paying attention to helical plate orientations so it matches
the plate orientation on the platform.
11.
Install the five extensions using the provided hardware.
12.
Assemble the platform with grating and handrails.
13.
Lift complete platform up onto the elevated extensions and bolt into place using provided hardware.
14.
Release full weight of platform and tighten/secure hardware.
15.
If platform is 6 feet or taller, loosely install the cross-bars on the four helical extensions underneath
where the WIC will be placed.
16.
Lift and bolt stairs to stair landing using provided hardware.
17.
Lift and set WIC on elevated platform. Be sure to bolt the WIC base to the frame prior to releasing all of
the weight of the WIC on the frame. See “WIC Lifting and Placement Procedures” starting on page 77.
18.
Lift and set generator on elevated platform in the designated location.
