Vertiv
|
XTE 802 Series Walk-In-Cabinet (WIC) Description & Installation Manual (631-205-434)
|
Rev. D
34
WIC and Generator Combo Foundation Options
WIC and Generator Combo Helical Platform (P/N D1000-0010-0122)
If ordered through CEEOT, this platform will ship to the site completely configured with WIC and generator
including all conduit and cabling. Consists of four (4) self drilling helicals, one (1) platform, two (2) stairs, and
leveling hardware. Each helical is 8 inches in diameter and 7 feet in length. Each helical will be drilled into the
ground to 6 inches of grade (on the door side of the WIC if on a slope). Four leveling hardware sets will be
installed in each helical, then the platform will be installed on top of the leveling hardware. The stairs are then
attached to the WIC and the generator area.
NOTE!
For grounding purposes, NEC requires a minimum of 10 vertical feet of helical in the ground.
WIC and Generator Combo Concrete/On the Ground Platform (P/N D1000-0010-0123)
If ordered through CEEOT, this platform will ship to the site completely configured with WIC and generator
including all conduit and cabling. Platform ships complete. Consists of three (3) skis, one (1) platform, two (2)
stairs, and leveling hardware. Platform is simply lifted and set on the ground or concrete. Each ski has three
leveling points for adjustments. The stairs are then attached to the WIC and the generator area.
Generator Wings (P/N D1000-0020-0032)
To be used with WIC and Generator Combo Platforms for generators requiring additional length such as the
Generac 30 KW Diesel Generator. Consists of two generator wings and required hardware. Adds 24" of length
to accommodate the largest generators.
Elevated WIC and Generator Platform 4' (P/N D1000-0010-0089-04)
Consists of five (5) self drilling helicals, five (5) 3-foot extensions, one (1) platform, one (1) stairs, one (1) stairs
landing, and leveling hardware. Each helical is 10 inches in diameter and 10 feet in length. Each helical will be
drilled into the ground to around 3 inches of grade or as low as desired. Confirm helical tops are level. Install
the extensions on top of the helicals. Confirm extension tops are level. Install the platform on top of the
extensions. Install the stairs landing and the stairs. The WIC and Generator are installed and bolted/anchored
to the platform.
NOTE!
For grounding purposes, NEC requires a minimum of 10 vertical feet of helical in the ground.
Elevated WIC and Generator Platform 6' (P/N D1000-0010-0089-06)
Consists of five (5) self drilling helicals, five (5) 5-foot extensions, four (4) cross-beam supports, one (1)
platform, one (1) stairs, one (1) stairs landing, and leveling hardware. Each helical is 10 inches in diameter and
10 feet in length. Each helical will be drilled into the ground to around 3 inches of grade or as low as desired.
Confirm helical tops are level. Install the extensions on top of the helicals. Confirm extension tops are level.
Install the platform on top of the extensions. Install cross-beam supports. Install the stairs landing and the
stairs. The WIC and Generator are installed and bolted/anchored to the platform.
NOTE!
For grounding purposes, NEC requires a minimum of 10 vertical feet of helical in the ground.
Elevated WIC and Generator Platform 8' (P/N D1000-0010-0089-08)
Consists of five (5) self drilling helicals, five (5) 7-foot extensions, four (4) cross-beam supports, one (1)
platform, one (1) stairs, one (1) stairs landing, and leveling hardware. Each helical is 10 inches in diameter and
10 feet in length. Each helical will be drilled into the ground to around 3 inches of grade or as low as desired.
Confirm helical tops are level. Install the extensions on top of the helicals. Confirm extension tops are level.
