Vertiv
|
XTE 802 Series Walk-In-Cabinet (WIC) Description & Installation Manual (631-205-434)
|
Rev. D
30
Alarms
•
The XTE 802 Series Walk-In-Cabinet (WIC) is equipped with intrusion, HVAC, various commercial AC
power and DC power alarms.
•
Two alarm blocks are provided on the Telco Board inside the WIC for alarm connections.
•
An alarm pinout is specified in the schematic drawings shipped with the WIC.
•
The intrusion alarm triggers whenever the door is opened. It can be disabled by pulling the alarm
plunger completely forward.
Light Switch
Located to the right of the door as you enter. A light switch is provided for the four (4) interior ceiling mounted
LED lights.
Rack Sizes
Accommodates both 19" and 23" width equipment racks with EIA hole spacing.
Fold Down Laptop Desk with Document Holder
The XTE 802 Series Walk-In-Cabinet (WIC) is equipped with a fold down laptop desk with document holder.
See
Cable Entry Ports
The WIC contains wall and floor cable entrances.
The WIC has one (1) cutout in each of the left and right side walls which are equipped with Roxtec 4/4 EzEntry
ports. See
for the location of the cable entry ports.
The WIC has five (5) cutouts in the floor which are all equipped with Roxtec 24/24 EzEntry ports. See
for the location of the cable entry ports. See
on page 26 for conduit knockout locations in WIC base
pan.
Climate Control
The XTE 802 Series Walk-In-Cabinet (WIC) is offered with the climate control options listed in
HVAC Units
AC heaters are included with each air conditioning unit to maintain internal WIC temperatures during cold
climate conditions. Air conditioners are AC powered, and are refrigerant-based vapor compression devices.
The heaters are electric strip type, integral to the a/c unit.
Thermal Controller
Marvair CoolLink.
