Vertiv
|
XTE 802 Series Walk-In-Cabinet (WIC) Description & Installation Manual (631-205-434)
|
Rev. D
103
Figure 46:
Recommended DC Generator Cable Routing
Side
DC Generator
Cable Entrance
(2) 2.5-inch Knock Outs
Bottom
DC Generator
Cable Entrance
(2) 2.5-inch Knock Outs
OR
(2) 2.5-inch Knock Outs
Side
DC Generator
Cable Entrance
Bottom
DC Generator
Cable Entrance
OR
1. DC generator cables enter the WIC
either via the knock outs located on the
rear of the base or via the knock outs
located on the bottom of the base.
2. DC generator cables are routed up
through the knock outs provided in the
interior floor of the WIC. The cables then
are routed up the cable ladder on the
rear wall, then to the ladder rack on the
adjacent wall, then transition to the
ceiling ladder rack, and then down into
the NetSure Power System.
