
Serial Interface Manual
TLS4/TLS-450 Monitoring Systems
Part No. 577013-950, Revision L
227
Function Code:
5BF
Version 1
Function Type:
Set Custom Alarm Label, device number, and indications
Command Format:
Inquire:
Display:
<SOH>S5BF00AANNTTflpbdaaaaaaaaaaaaaaaaaaa
<SOH>I5BF00
Computer:
<SOH>s5BF00AANNTTflpbdaaaaaaaaaaaaaaaaaaa
<SOH>i5BF00
Notes:
1.
AA - Alarm/Warning Category:
See explanation for "AA" in Function i10100
2.
NN - Alarm Type Number:
See explanation for "NN" in Function i10100
3.
TT - Device (or Tank) Number (Decimal, 00=all)
4.
f - Custom Alarm Flag
0=Disabled
1=Enabled
Note
: This flag is ignored in TLS-450. Custom Alarm setting at
alarm level is unsupported. This feature is supported at
system level only. (by using 5BD command)
5.
l - LCD Indication Flag
In TLS-350:
0=Disabled
1=Enabled
In
TLS-450
: (future)
0=None
1=Yellow
2=Red
Note: TLS-450: Version 01 supports this setting as in
TLS-350 only; i.e.0=Disabled 1=Enabled.
6.
p - PRINTOUT Indication Flag
In TLS-350:
0=Disabled
1=Enabled
In
TLS-450:
PRINTOUT flag is ignored
.
(In TLS-450, the alarm-print assignment will be part of
Automatic Events Setup – See 5P1, 5P4 & 5P6)
7.
b - BEEP Indication Flag
0=Disabled
1=Enabled
8.
d - LED Indication Flag
0=Disabled
1=Enabled
9.
a - Custom Alarm Label (19 ASCII characters [20h-7Eh])
Typical Response Message, Display Format:
<SOH>
I5BF00
JUN 22, 2001 3:15 PM
CUSTOM ALARM LABELS
IN-TANK ALARMS
OVERFILL ALARM
T 1:(custom alarm label)
LCD: ENABLED
PRINT: ENABLED
BEEP: DISABLED
LED: ENABLED
T 2:(custom alarm label)
LCD: ENABLED
PRINT: ENABLED
BEEP: DISABLED
LED: ENABLED
<ETX>