Calibration, Maintenance, Troubleshooting and Warranty
Warranty
334
MultiMode SPM Instruction Manual
Rev. B
Warranty Eligibility
To be eligible for the above warranties, purchaser must perform preventative maintenance in
accordance with the schedule set forth in the manual provided. Veeco assumes no liability under the
above warranties for equipment or system failures resulting from improper operation, improper
preventative maintenance, abuse or modi
fi
cations of the equipment or system from the original
con
fi
guration.
Note:
This warranty is in lieu of all other warranties, expressed or implied and
constitutes ful
fi
llment of all of Veeco’s liabilities to the purchaser. Veeco does
not warrant that the system can be used for any particular purpose other than
that covered by the applicable speci
fi
cations. Veeco assumes no liability in any
event, for consequential damages, for anticipated or lost pro
fi
ts, incidental
damages or loss of time or other losses incurred by the purchaser or any third
party in connection with systems covered by this warranty or otherwise.
Service
Field service is available nationwide. Service and installations are performed by factory trained
Veeco service personnel. Contact the Veeco Metrology sales/service of
fi
ce for prompt service.
Veeco Metrology
112 Robin Hill Road
Santa Barbara CA 93117
Attn.: Service Center
Phone: (805) 967-2700
Fax: (805) 967-7717
