32
03-914648-00:7
The Injector Component Screen (below) is displayed once you select from
the above Injector menu or if only one injector installed. This screen
contains the Injector Status information [Setpoint and Actual Temperature,
Split State (if EFC equipped)], Injector Component Method instructions, a
prompt line, and softkeys.
CP-1177 Injector
The CP-1177 method has two pages:
Page Description
1
Temperature control
2
Split state programming (if type 1 EFC is installed)
If the CP-1177 has manual pneumatics, then the split valve is
programmed in the valve table located in SAMPLE DELIVERY.
The following are typical method parameters for a CP-1177.
Temperature is entered in page 1.
ACTIVE
METHOD
EDIT
METHOD
CTRL
RUN
TIME
END
TIME
Method 1
Method 1
0.00
20.00
Set (°C): 250 Actual (°C): 250
FRONT CP-1177, Page 1 of 2
1177 Oven Power:
ON
1177 Temperature (°C)
250
Default
Range
Temperature 50
[50 - 450]
Injector On/Off
Off [On/Off]
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
