Utax 2550ci, User Manual

Page: 290 / 530

Status / Job Cancel
8-10
Checking the Detailed Information of Histories
Check the detailed information of each history.
Display of the detailed information of Job Finish history
Use the procedure below to check the job finish history.
1
Press the Status/Job Cancel key.
2
Press [Printing Jobs], [Sending Jobs] or [Storing
Jobs] and then [Log].
3
Select the job to check details from the list, and
press [Detail].
Detailed information of the selected job is
displayed.
4
To exit from the detailed information, press [Close].
NOTE:
In the event that an error appears on the
touch panel, press [Hold] to display the status screen
and check the job details screen.
NOTE:
If the user authentication screen appears,
enter your login user name and password and then
press [Login]. For this, you need to login with
administrator privileges. The login user name and
login password are both set to "2500" in the factory
default state.
Status Log
All
Job No. End Date Type
doc20070225141427
User Name Result
Completed 000080 01/25 14:14
Status
Job Name
1/1
Device/
Communication
Paper/Supplies
doc20070225142253 Completed 000081 01/25 14:22
doc20070225142310 Completed 000082 01/25 14:23
doc20070225142458 Error 000083 01/25 14:24
doc20070225143034 Completed 000084 01/25 14:30
Job Type
Status
Printing Jobs Sending Jobs Storing Jobs
Detail
12/12/2011 10:10
NOTE:
To check the information of the next/
previous page, press [ ] or [ ].
NOTE:
The job history can be sent by E-mail. For
details, refer to Sending Log History on page 9-65 .