Ultrak JPD-100, User Manual

Page: 118 / 124

518007-1960-G C-3 KEMU040018
January 200
2
C.2.2 JPD-100/R Controller To CCU-100 Front Panel Controller Connector.
a. Power
Connect a 120 Vac to +5 Vdc power supply rated at 300mA maximum
(P/N 849060-0121) to the terminal block on the JPD-100/R Controller.
TB1-5 +5 V
TB1-6 GND
b. RS-422 Control Data
1. Using two shielded twisted pair RS-422 cable (P/N 849518-0327),
connect the data lines from the controller TB-1 to the terminal block
(P/N 842372-0603).
JPD-100/R Controller Terminal Block
TB1-2, RX+ Black, TX+
TB1-3, TX+ White, RX+
TB1-4, TX- Blue, RX-
TB1-7, RX- Red, TX-
2. Plug one end of the coiled cable (P/N 849518-0306) into the
telephone jack on the terminal block and the other end into the front
panel controller connector on the CCU-100 or CCU-100A Central
Control Unit.