Ultrak JPD-100, User Manual

Page: 114 / 124

518007-1960-G B-3 KEMU040018
January 200
2
AUXILIARY CONTROL
The address of the auxiliary control unit must be displayed on the JPD-100 as the control camera.
The auxiliaries in the CATS Series Video Switcher and SSI-100 are controlled using control camera 1.
FUNCTION PROCEDURE
(Keystrokes are separated by a ">")
Turn Auxiliary ON Auxiliary #>AUX (changes the state of the contact; on if off and
off if on)
or
AUX>Auxiliary #>1
Turn Auxiliary OFF Auxiliary #>AUX (changes the state of the contact; off if on; on
if off)
or
AUX>Auxiliary #>3
ALARM CONTROL
Standard Alarms requires AIU-100, AIF-100/IN, and/or host computer with CCU-100 Series Central
Control Unit, SSI-100 Small System Interface, or CCU-100HD Central Control Unit with Maxpro HD Video
Switcher and optional MX-4248 I/O Module
Video Alarms require a CCU-100HD and a Maxpro HD Series Video Switcher
All keystrokes are done on the JPD-100 Controller
FUNCTION PROCEDURE
(Keystrokes are separated by a ">")
Enable Standard Alarm(s) Alarm #>ALARM>1>
1 (Enable only # Entered)
or
3 (Enable all alarms)
Disable Standard Alarm(s) Alarm #>ALARM>2>
1 (Disable only # Entered)
or
3 (Disable all alarms)
Acknowledge Standard or Video
Alarm(s) ALARM>
1 (Acknowledge oldest standard alarm)
2 (Acknowledge all standard alarms)
3 (Acknowledge oldest video alarm)
4 (Acknowledge all video alarms)