Ultrak JPD-100, User Manual

Page: 38 / 124

PRIMARY CONTROL MONITOR
518007-1960-G 2-17 KEMU040018
January 2002
CHANGE PRIMARY CONTROL MONITOR
To change the control monitor (but not the control camera), enter one of the
following command sequences.
a. Monitor #>MON>ENTER # MON ENTER
b. Monitor #>MON>CNTL # MON CNTL
Example:
The display on the controller shows CAM 1/MON 1.
CNTL - CAM 1 MON 1
Enter the following command sequence to change the control monitor to 3.
3 MON ENTER
# MON CNTL
Now the display shows CAM 1/MON 3.
CNTL - CAM 1 MON 3
All control commands are performed on camera 1 and the video from camera
1 is viewed on monitor 3.