Ultrak JPD-100, User Manual

Page: 113 / 124

B-2
FUNCTION PROCEDURE
(Keystrokes are separated by a ">")
1 (Up 1 line), 2 (Down 1 line), or 3 (Exit)
List Sector ID’s OPT>5>2>
1 (view next page) or 2 (when done)
Program Tour 1-3 (KD6 UltraDome) OPT>4>1>Tour #>Enter>
1 = Start
2 = Stop
Run Tour (KD6 UltraDome) OPT>1>4 = Activate or Deactivate function keys 5,6, and 7.
When activated, function keys 5, 6, and 7 start tours 1, 2, and
3, respectively.
Freeze/Unfreeze Video (KD6
UltraDome) OPT>1>3 = Activate or Deactivate function key 8. When
function key 8 is activated, it toggles between freeze and
unfreeze video.
MULTICALL CONTROL
(Must have a CCU-100 or SSI-100 in the System)
All keystrokes are done on the JPD-100 Controller
FUNCTION PROCEDURE
(Keystrokes are separated by a ">")
Run MultiCall MultiCall #>MCALL>1
Halt All MultiCalls
MCALL>3
Stop Specific MultiCall MultiCall #>MCALL>3
Hold Specific MultiCall MultiCall #>MCALL>6>6
Control MultiCall One Step at a Time MultiCall #>MCALL>6>
1>forward one step
or
3<back one step
When done stepping through MultiCall
4<continue MultiCall
6-Exit and leave MultiCall on hold
Continue Running MultiCall On Hold
MultiCall #>MCALL>6>4