Ultrak JPD-100, User Manual

Page: 36 / 124

PRIMARY CONTROL
518007-1960-G 2-15 KEMU040018
January 2002
2.2.3 Primary Control Camera and Control Monitor
Upon power-up of the system, the primary control camera and monitor are
camera one and monitor one. A secondary control camera/monitor
combination, if desired, has to be selected.
The first line of the display on the controller shows the CAM and the MON
the controller is controlling. On the controller, the camera number has a
symbol that looks like a camera beside it and the monitor number has a
symbol that looks like a monitor beside it.
CNTL - CAM 1 MON 1
Use the following command sequences to change the primary camera and
monitor combination currently under control of the Joystick Controller.
CHANGE PRIMARY CONTROL CAMERA
NOTE
The commands are in bold typeface and are
separated by the symbol >
.
Camera #>ENTER # ENTER
or
Camera#>CNTL # CNTL