Ultrak JPD-100, User Manual

Page: 67 / 124

MULTICALL CONTROL
518007-1960-G 2-46 KEMU040018
January 2002
2.2.12 MultiCall Control (00-255).
The MultiCalls stored in the CCU-100 and CCU-100/A Central Control Units
or SSI-100 Small System Interface Unit can be controlled using the JPD-100
Joystick Controller. Refer to the CCU-100 Central Control Unit or SSI-100
Small System Interface Unit User’s Manual, as applicable for your system,
for programming MultiCalls.
An operator can start a MultiCall, stop a MultiCall, put a MultiCall on hold,
move the MultiCall forward or backward one step at a time, and continue the
MultiCall from the held position.
CAUTION
The same MultiCall can be started more than
once. If this is done, multiple versions of the
same MultiCall are running simultaneously with
different starting times. This can lead to erratic
operation of the system.