Ultrak JPD-100, User Manual

Page: 73 / 124

CONTROLLING A MULTICALL ON HOLD
518007-1960-G 2-52 KEMU040018
January 2002
CONTROLLING A MULTICALL ON HOLD
Perform the following procedure to move forward one step in the MultiCall,
move backward one step in the MultiCall, or continue running a MultiCall that
has been placed on hold. You can move forward one step at a time until you
reach the end of the MultiCall. You can move backward one step at a time
until you reach the beginning of the MultiCall. If a MultiCall is a continuous
MultiCall (it calls itself as the last step in the MultiCall), you can move
forward from the last step to the first step or backward from the first step to
the last step.
1. Type the MultiCall Number.
2. Press MCALL .
The following display appears on the JPD-100 LCD display.
1>Start 3>Stop
4>Continue 6>Hold
3. Press 6 (Hold) .
The following display appears on the JPD-100 LCD display.
1>Forward 3<Back
4-Continue 6-Exit
a. Press 6 to exit the menu and leave the MultiCall on hold.