Ultrak JPD-100, User Manual

Page: 116 / 124

518007-1960-G C-1 KEMU040018
January 200
2
APPENDIX C. INSTALLATION JPD-100/R RACK MOUNT JOYSTICK
CONTROLLER
C.1 DESCRIPTION
The JPD-100/R Joystick Controller is designed for use in a control room that
requires a rack mounted controller. The operation of this controller is the same
as the standard JPD-100.
C.2 INSTALLATION
The JPD-100/R Joystick Controller has terminal block, TB1, on the back for
connection to a power supply and to RS-422 control data. This controller is
usually for connection to the rear panel of the CCU-100 or CCU-100A Central
Control Unit.
CAUTION
To Program A CCU-100, CCU-100A, or CCU-
100HD Central Control Unit, A Controller
Must Be Plugged Into The Front Panel
Controller Connector On The Central
Control Unit. To Connect A JPD-100/R
Controller To The Central Control Unit Front
Panel, A Terminal Block (P/N 842372-0603)
And A Coiled Cable (P/N 849518-0306) Are
Required.