Ultrak JPD-100, User Manual

Page: 57 / 124

LIST VECTORSCAN CONTENTS
518007-1960-G 2-36 KEMU040018
January 2002
2.2.8.3 List VectorScan Contents
The contents of each programmed VectorScan for each SmartScan unit
can be called up using the controller for display on a monitor.
Perform the following command sequence to view the contents of a
programmed VectorScan. Follow the prompts on the controller
display.
Press OPT OPT
Press 5 (on the numeric keypad) 5
Press 4 (VectorScan Contents) 4
Enter VectorScan # #
Press ENTER ENTER
The controller sends out a command to call-up the contents of the
VectorScan number entered for the primary (or secondary, if selected)
control camera. The list displays the PreShots with the programmed
transit times and dwell times in the order they are viewed by the
SmartScan unit. The VectorScan contents cannot be edited from this
listing.