Ultrak JPD-100, User Manual

Page: 51 / 124

GO TO PRESHOT
518007-1960-G 2-30 KEMU040018
January 2002
2.2.7.3 Go To PreShot
A PreShot call is sent to the control camera unless a secondary control
camera is selected, then it is sent to the secondary camera. To view the
PreShot scene, the camera must be called up on a monitor.
Enter the PreShot # and Press PSHOT # PSHOT
The controller sends out a command for camera one to go to the speci-
fied PreShot. The PreShot scene can be viewed on the monitor the
SmartScan unit is called up on. The title of the PreShot appears on the
monitor. If the PreShot does not exist, the SmartScan outputs the
message 'DOES NOT EXIST' on the video signal.
Example:
The controller display shows:
CNTL - CAM 1 MON 1
(no secondary camera/monitor selected)
Send camera one to PreShot 2.
2 PSHOT