
FIN SWE
RUS
ENG
12
12
Model
utu
20
hile
20
WEIGHT OF STOVE (KG)
65
270
NOMINAL POWER RATING OF STOVE (KW)
20
20
HEAT GENERATION (KW)
20
20
MINIMUM FLUE DRAUGHT AT NOMINAL OUTPUT (PA)
12
12
FLUE GAS MASS FLOW RATE (G/S)
14-14,5
14-14,5
FLUE GAS IT (O°C)
400
400
MINIMUM FLUE DIMENSIONS
1/2
1/2
FLUE CONNECTION PIPE (Ø MM)
115
115
FLUE THERMAL CLASS
T600
T600
MINIMUM SIZE OF AIR INTAKE HOLE (CM2/Ø MM)
75/50
75/50
MINIMUM SIZE OF EXHAUST AIR HOLE (CM2/Ø MM)
150/70
150/70
SIZE OF SAUNA ROOM (M3)
8-20
8-20
RECOMMENDED AMOUNT OF SAUNA STONES (KG)
40-60
40-60
INITIAL LOAD, MAX. (KG)
6
6
ADDITIONAL LOAD, MAX. (KG)
4
4
NUMBER OF ADDITIONAL LOADS
3
3
AMOUNT OF FIREWOOD CONSUMED (KG/H)
7
7
Sweeping hatch
Smoke hole / upper flue connection
Smoke hole / rear flue connection
The Utu sauna stove cladding has
a removable cover. The cover
should be removed if the sauna
stove is to be connected to a flue
at the rear.
Firebox door
Inside
Ash box
Adjustable legs 50 mm
Connecting pipe
Technical information
POWER RATING OF THE SAUNA STOVE
The power rating (kW) of the sauna stove
should always be chosen on the basis of the si-
ze of the sauna room (m3). Uninsulated wall
surfaces (brick, glass brick, glass, concrete, tile,
etc.) will increase the amount of power requi-
red. For each square metre of uninsulated wall
surface, add 1.2 m3 to the figure for the size of
the sauna room. For example, a 10 m3 sauna
room with a glass door corresponds to about a
12 m3 sauna room in terms of its power requi-
rement. If the sauna room has log walls, mul-
tiply the figure for the size of the sauna room
by 1.5. The minimum and maximum sauna
room size for the stove’s power rating must be
complied with.
The design of the sauna room must comply
with the relevant building regulations and the
guidance given in the RT building information
card.
Sauna stove components
Summary of Contents for HILE
Page 4: ...4...
Page 9: ...9 FIN SWE RUS 9 FIN SWE RUS ENG 10 3 33 20 4 10...