Chapter 11: Network settings
88
TruVision NVR 22 (SP) User Manual
3. Enter the NTP settings:
•
Interval (min):
Time in minutes to synchronize with the NTP server. The value
can be between 1 and 10080 minutes. Default is 60 minutes.
•
NTP Server:
IP address of the NTP server. Default is time.nist.gov.
•
NTP Port:
Port of the NTP server. Default is 123.
4. Click
Apply
to save the settings and click
Exit
to return to live view.
Email settings
The recorder can send email notifications of alarms or notifications through the network.
Note:
Ensure that the DNS address has been set up correctly beforehand.
To configure email settings:
1. From the menu toolbar, click
Network Settings
>
.
2. Enter the required settings.
Option
Description
E
nable Server
Authentication
Select the check box if your mail server requires authentication and
enter the login user name and password.
User Name
If the mail server requires authentication, enter the login user name.
Password
If the mail server requires authentication, enter the login password.
SMTP Server
Enter the SMTP server’s IP address.
SMTP Port
Enter the SMTP port. The default TCP/IP port for SMTP is 25.
Enable SSL/TLS
Select the check box to enable SSL/TLS if it is required by the SMTP
server. This feature is optional.
Sender
Enter the name of the sender of the email.
Sender’s Address
Enter the sender’s email address.
Select Receiver
Select an email recipient. Up to three receivers can be selected.
Receiver
Enter the name of the receiver of the email.
Receiver’s Address
Enter the email address of the receiver.
Include Snapshot
Select the Attach JPEG File check box if you want to send an email
with attached alarm images.
Interval
Select the interval time between the snapshots that are sent in the
single email. The default interval is 2 seconds.
The interval range represents the time range in between the
alarm/event snapshots being sent. For example, if you set the interval
range at two seconds, the second alarm/event snapshot will be sent
two seconds after the first alarm image.
3. Click
Test
to the test email settings.
