Chapter 13: Alarm and event setup
TruVision NVR 22 (SP) User Manual
119
Note:
For information on setting up TVRMobile and displaying information on the app,
please refer to the TVRMobile user manual.
Disable actions
The
Disable Actions
feature allows you to disable the execution of the event/alarm
actions and to influence the recording behavior, based on the arming status of an alarm
panel.
The actions associated with motion detection, VCA, and alarms (alarm inputs or
intrusion panel events) can be disabled when the alarm panel is disarmed. This will
avoid users receiving unnecessary notifications (push notifications, emails, events in
TruVision Navigator) or triggering actions (alarm output, PTZ preset, ...).
When the panel is armed again, the recorder will resume its scheduled operation and
execute the configured actions and recordings.
The Disable Actions function can be used via alarm input one or via the OH integration.
The function can also be used with non-Aritech alarm panels.
To set-up Disable Actions via alarm input 1:
1. From the menu toolbar, click
Alarm & Event Setup
>
Alarm Input
.
