Chapter 11: Network settings
TruVision NVR 22 (SP) User Manual
87
3. Select one of the DDNS types listed:
ezDDNS
: Click the
Get URL
button. The URL address to access the unit is
displayed. If no host name is specified, the DDNS will allocate one automatically.
The maximum length for the host name field is 64 characters. This limit does not
include tvn-ddns.net. An example of a host name could be
max64chars.tvn-
ddns.net
.
- Or -
DynDNS
: Select
DynDNS
and enter the server address for DynDNS. In the
recorder domain name field, enter the domain name obtained from the DynDNS
web site. Then enter your user name and password registered in the DynDNS
network.
For example:
Server address: members.dyndns.org
Domain: mycompanydvr.dyndns.org
User name: myname
Password: mypassword
- Or -
NO-IP:
Enter server address (for example, dynupdate.no-ip.com). In the host name
field, enter the host obtained from the NO-IP web site. Then enter the user name
and password that are registered with the No-IP network.
4. Ask your ISP service provider for your DNS server address or look it up in the
browser interface settings of your router.
Go to
Network Settings
and enter the preferred and alternate DNS server
addresses as well as the default gateway address.
5. Click
Apply
to save the settings and click
Exit
to return to live view.
NTP server settings
A Network Time Protocol (NTP) server can also be configured on your recorder to keep
the date and time current and accurate.
Note
: If the device is connected to a public network, you should use an NTP server that
has a time synchronization function, such as the server at the National Time Center (IP
Address: 210.72.145.44) or europe.ntp.pool.org. If the device is setup in a more
customized network, NTP software can be used to establish an NTP server used for
time synchronization.
To set up an NTP server:
1. From the menu toolbar, click
Network Settings
>
NTP
.
2. Select the NTP
check
box to enable feature. It is disabled by default.
