TruVision NVR 22 Series Page 24 User Manual Download

Page: 24 / 201

Chapter 4: Operating Instructions

TruVision NVR 22 (SP) User Manual

Name

Description

Front panel lock

You can lock or unlock the front panel with a key.

Status LEDs

Power

: A green light indicates the recorder is working correctly.

Red indicates a fault.

Event Alarm

: A steady red light indicates that there is a sensor

Alarm In or another alarm such as motion or tampering. No light
indicates that there is no alarm.

HDD

: HDD indicator blinks red when data is being read from or

written to the HDD. A steady red light indicates an HDD
exception or error.

Tx/Rx

: A green indicates a normal network connection. No light

indicates that it is not connected to a network.

Technical Alarm

: A steady red light indicates that there is a

technical alarm from the recorder. No light indicates that there is
no alarm.

Playback buttons

Reverse

: In live view mode, use to play back the earliest video.

In playback mode, playback a camera in the reverse direction.

Pause

: In live

view

, freeze the last image of the live display for

all active cameras displayed. In playback mode, stop playback.

Play

: In live view mode, play 24-hour playback of the current

camera (upper-left video tile if in multiview mode). In playback
mode, play back a camera in the forward direction. In search
mode, play back a selected video or view a snapshot. In PTZ
mode, do an auto tour.

Live

: Switch to live view mode.

Replay

: In playback mode, start playing the current file. Starts at

the beginning of the file.

PTZ buttons

Zoom +/-

: In live view mode, playback mode, and PTZ control

mode use this button to zoom in and out. Also use them to
navigate within menus.

Preset

: In

PTZ Control mode, press Preset and a numeric

button to call the specified preset.

Also use to edit holiday mode, video search mode, HDD
selection mode, user management mode, bookmark
management, and bookmark search.

Tour

: In PTZ Control mode, press Tour and a numeric button to

call the specified shadow tour.

Also use to scroll between calendar months and to navigate in a
text field.

Direction

The DIRECTION buttons are used to navigate between different
fields and items in menus.

Enter button

The ENTER button is used to confirm selection in any of the
menu modes.

10. Archive button

Press once to enter quick archive mode. Press twice to start
archiving. Indicator blinks green when data is being written to
backup device.

Summary of Contents for NVR 22 Series










































































































































































































Search results

Summary of Contents for NVR 22 Series

Reviews:

Related manuals for NVR 22 Series

Brands by name

Popular brands

TruVision NVR 22 Series, User Manual

Search results

Summary of Contents for NVR 22 Series

Reviews:

Related manuals for NVR 22 Series

Brands by name

Popular brands