Chapter 18: Using the web browse
TruVision NVR 22 (SP) User Manual
179
Note
: If cameras still have default settings, they might have the same IP addresses.
This creates an IP conflict. Use the
Modify
button to assign a different IP address to
each camera.
To manually add an IP camera:
1. From the menu toolbar, click
Remote Configuration
>
Camera Setup
>
IP Camera
Status
.
2. Click
Manual Add
. In the pop-up window, enter the camera details such as the IP
camera address/domain, protocol, management port, user name, and password.
Click
OK
.
The camera is added to the end of the list of devices.
Note
: Only one camera can be manually added at a time.
Import and export IP camera configuration
settings
You can export and import the IP camera configuration settings from the recorder. This
is useful if you want to copy the configuration settings to another recorder, if you want
to edit a large list of camera settings in Excel, or if you want to make a backup of the
camera settings.
Insert an external storage device in the recorder. Go to
Remote Configuration
>
IPC
Import/Export
to import or export configuration settings. Click
Export
to export the
recorder’s configuration settings into an external storage device or click
Import
to
import configuration settings after selecting a configuration file from the external storage
device. The file format is Excel.
Note
: If a setting is incorrect, the import function will not work for cameras that share
the setting. An error message will appear on screen.
Restricted camera access
This function lets the administrator block live view from selected cameras on local
monitors for all users. Only the administrator can consequently see live view from these
selected cameras on a local monitor. However, live view is still visible via the web.
This function differs from the user configuration setup where live view can be blocked
for specific users for all cameras (see
“Camera configuration settings” on page 147 for
further information).
To set up restricted access:
1. From the menu toolbar, click
Remote Configuration
>
Camera Setup
>
Restricted
Access
.
A list of all the cameras connected to the recorder is displayed.
