134
TruVision NVR 22 (SP) User Manual
Chapter 15
Storage management
This chapter describes the content of the Storage Management menu, including HDD
information, Storage Mode, S.M.A.R.T. settings as well as bad sector detection and
RAID.
HDD information
You can check the status of any of the installed HDDs on the recorder at any time.
To check the status of an HDD:
1. From the menu toolbar, click
Storage Management
>
HDD Information.
2. Note the status of the HDDs listed under the Status column.
If the status is listed as Normal or Sleeping, the HDD is in working order. If it is listed
as Abnormal and has already been initialized, the HDD needs to be replaced. If the
HDD is Uninitialized, you need to initialize it before it can be used in the recorder.
Refer to “Initialize an HDD” on page 135 for more information.
Note
: The status information is also shown in the
System Information > HDD
window.
