Chapter 10: Camera setup
80
TruVision NVR 22 (SP) User Manual
3. To record a new shadow tour, click
and use the directional buttons on the PTZ
control panel to move the camera along the desired path.
4. Click
to save the shadow tour.
Note
: The shadow tour can be overwritten.
5. Click
Exit
to return to live view.
To call up a shadow tour:
1. From the menu toolbar, click
Camera Setup
>
PTZ Preset/Tours
.
2. Select the shadow tour from the list and click
to start the tour. Click
to stop
the shadow tour.
3. Click
Exit
to return to live view.
V-stream encoding
If the available bandwidth is limited, you can remotely view several channels in real
time with one stream over the web browser or VMS (Video Management System), such
as TruVision navigator, using the V-stream encoding option ("V" stands for "virtual").
When enabled, you can see the output from the cameras on a remote client monitor in
one stream.
Note
:
The V-stream uses the layout that is set up for the BNC monitor.
To setup V-stream encoding:
1. From the menu toolbar, click
Camera Setup
>
V-Stream Encoding
.
2. Select the
Enable V-Stream Encoding
check
box to enable the feature.
3. Select the
Frame Rate
from the drop-down list.
4. Select the
Max. Bitrate
from the drop-down list.
Note
: The layout of the V-stream can be set up via the OSD menu (Display Settings >
Layout menu (BNC)) or via the webpage.
Object counting
This function helps to calculate the number objects entering or exiting a configured area
and is primarily used with entrances or exits.
Set up the counting function from the camera itself. Please refer to the camera’s
configuration manual for further information.
Note:
Only TruVision Series 4 cameras currently support counting. This function cannot
distinguish between a moving person and a moving object.
