Chapter 18: Using the web browser
180
TruVision NVR 22 (SP) User Manual
2. Select one or more cameras to restrict live view access.
The selected cameras then display a black video tile.
3. Click
Apply
to save the settings and then click
Exit
to return to live view.
License plate identification
License plate recognition lets you identify, track and analyze vehicle license plates as
they enter or leave your site. The recorder can be set up to automatically capture
license plates for storage and later analysis. You can also create reports of the plates
identified.
Note
: The TruVision ANPR IP camera is only supported in certain regions. Refer to the
camera datasheet for the list of countries in which is it supported.
License plate capture
Use this function to set up the area on s
creen to be detected and to capture a vehicle’s
number plate information.
Note
: This license plate functionality only applies to the EMEA region.
To set up license plate capture:
1. From the menu toolbar, click
Remote Configuration
>
Camera Setup > License
Plate Capture > License Plate Capture
.
2. Select the desired ANPR camera from the drop-down list.
3. Select the
Enable
check box to enable license plate capture.
4. Set up the detection area.
Under
Total Number of Lanes
, select the desired number of lanes from the drop-
down list. Up to four lanes can be set up. For the best performance, we recommend
using one camera for each lane.
Click the
Area Settings
tab and then click the
Draw Detection Area
button to set
up the lanes. Select the desired detection area on the image. Using the mouse, click
and drag the yellow lane line to set the area.
