Trilithic EASy-PLUS, Operation Manual

Page: 77 / 114

EASyPLUS Encoder/Decoder - Operation Manual V8.09
75
Adding a Visionary Device
To add a Visionary device to the list of managed devices, perform the following
procedure.
1. To add a Visionary device to the list, click the Add button.
2. In the pop-up Add a Visionary
Overlay Device window, enter a
name in the text box. This will be
used to identify the Visionary device.
3. Enter the IP Address of the Visionary
Overlay device.
4. Enter the TCP Port number for
communication (the default setting is
59901 ).
5. Enter the Streaming Port number,
which allows the EASyPLUS to send
streaming audio to the Visionary
device (the default setting is
59902
).
6. Use the Resolution pull-down list to
select the default screen resolution of the Visionary.
7. Select the Show EAS Alert Image check box to display an on-screen EAS
image or icon to accompany the EAS event.
8. Use the EAS Alert Image X Position control box to set the horizontal location for
the EAS image or icon.
1
is furthest left;
852
is furthest right.
9. Use the EAS Alert Image Y Position control box to set the vertical location for
the EAS image or icon.
1
is closest to the top of the screen;
479
is closest to the
bottom of the screen.
10. Select the
Show Station ID Logo
check box to display an on-screen station
identification logo.
11. Use the Station ID Logo Group
X Position
to set the horizontal location for the
station identification logo. 1 is furthest left; 852 is furthest right.
12. Use the Station ID Logo Group
Y Position
to set the vertical location for the
station identification logo. 1 is closest to the top of the screen; 479 is closest to
the bottom of the screen.