Trilithic EASy-PLUS, Operation Manual

Page: 41 / 114

EASyPLUS Encoder/Decoder - Operation Manual V8.09
39
Automatic RWT Generation Settings
In the Automatic RWT Generation Settings group, set the
parameters for automatic generation of Required Weekly
Tests. It is desirable to manually generate the RWT once a
week, on a different day and at a different time, from one week
to the next. If manual RWT generation is not possible, s et the
EASyPLUS Configuration software to perform an automatic
RWT.
• Disabled - Select this option if the Required Weekly Test will be manually generated.
• Enabled Using County of License - Select this option to automatically encode an
RWT every week using the county of license as the FIPS code.
• Enabled Using Selected Counties - Select this option from the pull-down list to
encode RWT messages with all of the configured counties.
Using the Between the Days and Between the Hours pull-down lists, specify a span of
days and hours in which the RWT will be generated. Precise scheduling is not permitted in
order to assure compliance with FCC regulations. The EASyPLUS will schedule an RWT
to be transmitted each week between (and including) the days and hours specified. It also
guarantees that a different time and day are used each week.
In order to prevent the retransmission of received RWTs, disable
the RWT event in the Events tab. This will not prevent the
transmission of manually or automatically generated RWTs.