Trilithic EASy-PLUS Operation Manual Download

Page: 72 / 114

EASyPLUS Encoder/Decoder - Operation Manual V8.09

Deleting an SCTE-18 Device

To delete an SCTE-18 recipient:

1. Select a device from the

SCTE-18 Devices

list, then click the

Delete

button.

2. A status window will briefly appear; after the window closes, the selected device

will no longer be displayed.

Testing an SCTE-18 Device

Click the

Test

button to send a simulated EAS alert to the selected device.

The

Test

button is intended as a setup and troubleshooting tool. It does not

replace a legitimate EAS message and does not satisfy any legal requirements for EAS

testing.

Configuring an IP Switch Device

IP switches allow contact closures to be used at distant locations via network connection.

Additionally, IP switches allow county-specific contact closures.

Summary of Contents for EASy-PLUS



















































































































Search results

Summary of Contents for EASy-PLUS

Reviews:

Related manuals for EASy-PLUS

Brands by name

Popular brands

Trilithic EASy-PLUS, Operation Manual

Search results

Summary of Contents for EASy-PLUS

Reviews:

Related manuals for EASy-PLUS

Brands by name

Popular brands