Trilithic EASy-PLUS Operation Manual Download

Page: 15 / 114

EASyPLUS Encoder/Decoder - Operation Manual V8.09

Software Installation

Chapter 3

If during installation, Windows asks if you wish to install the

EASyPLUS software without a digital signature or Windows logo

testing, click the Yes button or the Continue Anyway button.

Computer System Requirements

In order to install the EASyPLUS Configuration software, the following computer hardware and

software conditions must be met:

•  Windows XP or newer operating system
•  A screen resolution of at least 800 x 600 pixels
•  500 MHz processor with 512 MB of RAM and 1.5 GB of free hard drive space

In addition, the following are required in order to establish communications between the

EASyPLUS Configuration software and the EASyPLUS Encoder/Decoder:

• 9-pin RS-232 interface or USB to RS-232 adapter (if an Ethernet connection is not

used)

• 10/100 BaseT Ethernet network interface card with an RJ-45 connector
• Telephone modem (optional for modem communications)

This chapter provides instructions for installing the EASyPLUS

Configuration software. For detailed installation instructions

for the EASyPLUS, refer to the EASyPLUS EAS Encoder/

Decoder Hardware Manual.

Summary of Contents for EASy-PLUS



















































































































Search results

Summary of Contents for EASy-PLUS

Reviews:

Related manuals for EASy-PLUS

Brands by name

Popular brands

Trilithic EASy-PLUS, Operation Manual

Search results

Summary of Contents for EASy-PLUS

Reviews:

Related manuals for EASy-PLUS

Brands by name

Popular brands