Trilithic EASy-PLUS Operation Manual Download

Page: 105 / 114

EASyPLUS Encoder/Decoder - Operation Manual V8.09

103

EAS Protocol Text: ZCZC-EAS-RMT-018003-018000-0015-2752215-WYRU/AM –

•

The actual EAS code string received.

Alert Text: An EAS Participant has issued a *** Required Monthly Test *** for the

following counties: Allen IN - State of Indiana - Marion IN. Effective Until 10/02/09

18:30:00 EDT. WYRU/AM

•

An English translation of the received code string.

Received from Channel 1, Call Letters: WYRU/AM

•

The encoder/decoder audio input that the message was received from.

Status: Duplicate Message

•

The reason the message was not retransmitted.

EAS Message Transmissions

EAS messages that are encoded by the user (not received off-air) contain information

regarding the message itself, the time the message was processed, the times at which each

EAS audio component is sent, the user account responsible for the message, and a message

ID generated at log time. This information contained within the EAS message may help the

reader to associate related logs with each other. For details on EAS messages, refer to title

47, part 11 of the Code of Federal Regulations (47 CFR, part 11).
The following is an example of an

EAS transmission log

10/02/09 18:19:00 EDT Transmit Log

Originator: EAS Participant

Event: Civil Emergency Message

Origination Time: 10/02/09 18:18:00 EDT

Expiration Time: 10/02/09 18:33:00 EDT

EAS Protocol Text: ZCZC-EAS-CEM-018047-0015-2752218-Eng Test-

Alert Text: An EAS Participant has issued a *** Civil Emergency Message *** for

the following counties: Franklin IN - Marion IN. Effective Until 10/02/09 18:33:00

EDT. Eng Test

Operator (ID 1F4) Initiated an Alert Message at 10/02/09 18:18:19 EDT

Transmitted 8 second Attention Tone at 10/02/09 18:18:24 EDT

Transmitted 21 second Voice Message at 10/02/09 18:18:34 EDT

Transmitted EOM at 10/02/09 18:18:56 EDT

Unique Message ID 12593899

Summary of Contents for EASy-PLUS



















































































































Search results

Summary of Contents for EASy-PLUS

Reviews:

Related manuals for EASy-PLUS

Brands by name

Popular brands

Trilithic EASy-PLUS, Operation Manual

Search results

Summary of Contents for EASy-PLUS

Reviews:

Related manuals for EASy-PLUS

Brands by name

Popular brands