Trilithic EASy-PLUS, Operation Manual

Page: 49 / 114

EASyPLUS Encoder/Decoder - Operation Manual V8.09
47
Configure County Subdivisions
Use of County Subdivisions is rare and must be specified
in the EAS State Plan and approved by the FCC. Trilithic
recommends that all subdivisions within a county be left in the
default (active) state.
1. Select a county from the Selected Counties list to be configured by clicking on the
county name.
2. Click the Edit button.
3. From the pop-up County Settings
window, use the check boxes to
select which regions of the county will
be processed. Disabling a County
Subdivision will prevent the EASyPLUS
from transmitting EAS messages
received for that specific County
Subdivision
.
4. Use the check boxes to select which
routing zones will be processed. The
routing zones are used to control the
TTL-32 Expansion Board (if installed).
Each zone corresponds to a TTL output
on the TTL-32 Expansion Board. This is
primarily used with a SM-16 to perform
trunk switching. These routing zones only affect the TTL-32 outputs.
5. After selecting the county subdivisions and location routing zones, click the
OK
button.
Delete a County from the Active Counties List
1. Select the county to be removed from the Selected Counties list by highlighting the
county name.
2. Click the Delete button at the lower-right corner of the window to remove
the county from the list.