EASyPLUS Encoder/Decoder - Operation Manual V8.09
38
EAS Settings
The
EAS Settings
group is used to configure information that is included in outgoing EAS
messages.
•
Enable CAP Alerts
- Allows the EASyPLUS to
receive CAP messages from EASyCAP series
software or hardware.
•
EAS Originator
- Select the appropriate originator
code for your system (default is “EAS participant”).
•
Station Identification -
Enter a unique identifier
(up to 8 characters) for the EASyPLUS.
•
Default EAN Input
- Uses the audio from an audio
input when an EAN is received via CAP rather than
the audio resource included in the CAP message.
This allows for live interaction from station
personnel, or use of dedicated audio for the EAN.
•
EAS Details Channel
- Enter the channel of your
EAS details channel if one is wired. This channel
should be available to all subscribers. If using
Tune-To messaging, viewers will be directed to tune to this channel for further details.
•
Use Short RWT Text
- A short message will be used for Required Weekly Tests. For
example: “A Required Weekly Test has been issued by an EAS Participant”.
•
Front Panel RWT Includes All Counties
- Include all configured counties when
encoding an RWT from the front panel menu. If disabled, only the county of license will
be included.
•
Enable the National Location Code
- Enables the use of “000000” as the National
Location code. FIPS code “000000” will be interpreted as the entire United States.
•
EAN Text uses “United States” as the Area
- The effected area shown in the text for
an EAN will be “the United States”, regardless of what location codes are received.
•
EAN Filter Ignores Location and Originator
- An EAN will be accepted (and
retransmitted) regardless of the received locations and originator code. Warning:
enabling this setting goes against FCC EAS regulations, but ensures that the system
will always activate if it receives an EAN.
•
EAN Activates All Equipment
- All equipment will be activated for an EAN, regardless
of any configured location routing.
Summary of Contents for EASy-PLUS
