Trilithic EASy-PLUS, Operation Manual

Page: 44 / 114

EASyPLUS Encoder/Decoder - Operation Manual V8.09
42
Network Settings
The Network Settings group is used
to configure the optional Ethernet
interface for communication over a
network.
1. Enter the
Static IP Address
of
the EASyPLUS.
2. Enter the
Subnet Mask
.
3. Enter the Default Gateway for the network.
4. Enter the configuration port number of the EASyPLUS in the Command TCP Port
box (The default value is 59911).
5. Enter the Connection Timeout (in seconds), after which the EASyPLUS will
disconnect from an unresponsive TCP connection.
6. Enter the port number, if any, which will be used for the EASyPLUS to receive EAS
alerts from EAS Network Receivers in the Network Receiver Port text box. (The
default value is 59912)
7. Enter the IP TTL (time to live) value for TCP and unicast UDP.
4. Enter the port desired to receive audio from EASyCAP series software or devices in
the Audio TCP Port box (The default value is 59919).
7. Enter the Multicast TTL value (maximum hops for multicast UDP packets).
8. If the Disable FTP Server option is selected, the internal FTP server will not be
available once the EASyPLUS is rebooted. This prevents new firmware from being
uploaded. It also prevents preview audio and text from being retrieved.
9. Enter the IP addresses of the primary and secondary DNS Servers . If no domain
name server is needed, set the values to 0.0.0.0 .
The IP address, subnet mask, default gateway, and command
TCP port can be programmed using the Program IP Settings
button on the Utilities tab. The EASyPLUS must be rebooted
after programming before changes will take effect.