Trilithic EASy-PLUS Operation Manual Download Page 17

Page: 17 / 114

EASyPLUS Encoder/Decoder - Operation Manual V8.09

Installing from the CD

1. Depending on which operating system

you are using, you may need to log in as

the system administrator.

2. Insert the EASyPLUS Configuration

software CD into the appropriate drive.

3. If Autorun is enabled for the CD-ROM

drive, the EASyPLUS Configuration setup

program will start automatically. If the

setup program does not start, click the

Windows

Start

button, then select

Run

and type

[drive]:\setup.exe

, then click

the

button (substitute the appropriate

drive letter in the command line, in place of

[drive]

4. Depending on which operating system you are using, the “Open File - Security

Warning” dialog box may appear. If this dialog box appears, click the

Run

button.

Summary of Contents for EASy-PLUS



















































































































Search results

Summary of Contents for EASy-PLUS

Reviews:

Related manuals for EASy-PLUS

Brands by name

Popular brands

Trilithic EASy-PLUS, Operation Manual

Search results

Summary of Contents for EASy-PLUS

Reviews:

Related manuals for EASy-PLUS

Brands by name

Popular brands