Trilithic EASy-PLUS Operation Manual Download

Page: 79 / 114

EASyPLUS Encoder/Decoder - Operation Manual V8.09

Editing a Visionary Device

To change the existing Visionary configuration:

1. Select the device in the

Visionary Overlay Devices

list, then click

the

Edit

button.

2. The pop-up

Modify a Visionary

Overlay Device

window will appear.

The process to edit a Visionary device

is the same as adding a new device,

outlined in

Chapter 5: EASyPLUS

Configuration

The IP Devices Tab

Configuring a Visionary Device

Adding a Visionary Device

Refer to the

Adding a Visionary

Device

section for detailed

instructions in editing a Visionary

Overlay device.

3. Click the

button to complete the

editing process.

Deleting a Visionary Device

To delete a Visionary configuration, select the device from the

Visionary

Overlay Devices

list by clicking on it once, then click the

Delete

button.

Testing a Visionary Device

Click the

Test

button to send a simulated EAS alert to the selected Visionary

device. The

Test

button is intended as a setup and troubleshooting tool. It

does not replace a legitimate EAS message, nor does it satisfy any legal

requirements for EAS testing.

Summary of Contents for EASy-PLUS



















































































































Search results

Summary of Contents for EASy-PLUS

Reviews:

Related manuals for EASy-PLUS

Brands by name

Popular brands

Trilithic EASy-PLUS, Operation Manual

Search results

Summary of Contents for EASy-PLUS

Reviews:

Related manuals for EASy-PLUS

Brands by name

Popular brands