background image

Installation  . . . . . . . . . . . . . . . . . . .2
Operation  . . . . . . . . . . . . . . . . . . .6
Cable Specifications . . . . . . . . . . . .7
Technical Specifications  . . . . . . . .8
Troubleshooting  . . . . . . . . . . . . . . .9
Contact Us  . . . . . . . . . . . . . . . . . .11
Compliance Information  . . . . . . .12

Unless otherwise indicated, the distances listed are the typical maximum cable
distance.  The actual maximum cable distances are dependent upon the physical
characteristics of the network installation.

** Minimum Cable Distance:

2 meters

Typical Maximum Cable Distance:

220 meters for 160/500MHz•Km
270 meters for 200/500MHz•Km

CFMFF13xx-28x 
User’s Guide

Single Mode to Multimode Retiming Media
Converter
•  Slide-in-Module Media Converter 
•  Gigabit Ethernet

Transition Networks CFMFF13xx-28x series media
converters extend multimode  interfaces over gigabit
Ethernet fiber optic cable.  The CFMFF13xx-28x is also
designed to be installed into the Transition Networks
PointSystem™ chassis.

Unlike most gigabit Ethernet media converters, which allow only two media
converters in series, the CFMFF13xx-28x has a retiming/reshaping feature that
makes it possible to connect any number of media converters in series.  

Part Number

Port One - Duplex Fiber Optic

1000Base-SX

Port Two - Duplex Fiber-Optic

1000Base-LX

CFMFF1314-280

SC, 850 nm multimode
220 m 

(721 ft)**

SC, 1310 nm single mode
10 km

(6.2 miles)

CFMFF1315-280

SC, 850 nm multimode
220 m

(721 ft)**

SC, 1310 nm single mode
25 km

(15.5 miles)

CFMFF1317-280

SC, 850 nm multimode
220 m

(721 ft)**

SC, 1550 nm single mode
65 km

(40.3 miles)

CFMFF1324-280 

SC, 850 nm multimode
220 m 

(721 ft)**

SC, 1300 nm multimode 

(1000Base-SX) 

2 km

(1.2 miles)

(62.5 / 125 mm fiber only)

CFMFF1335-280

SC, 850 nm multimode
220 m

(721 ft)**

SC, 1550 nm single mode
125 km

(77.5 mi)

CFMFF3535-280

SC, 1550 nm single mode
125 km

(77.5 mi)

SC, 1550 nm single mode
125 km

(77.5 mi)

NOTE: 

The SFMFF13xx-28x model is the

stand alone version of the media converter.
For more information, see the user’s guide
on-line at:  www.transition.com.

Summary of Contents for CFMFF1314-280








Reviews: